V＞01 Stiff
| Everyone's rating |
[Hardness] Medium hardness [Performance] Spin and Control to have excellent |
(Click to zoom the photo)
Averages reviews points
- Speed:7.75
- Spin:8.53
- Control:8.25
-
V > 01 Stiff is another innovation of the VICTAS V > 01 premium series for ambitious players. The German-Japanese team of designers (GJ Tec) succeeded in developing an extremely spinny offensive rubber which offers the perfect balance between speed and control to variable offensive strategists. The pimple geometry which is slightly more direct compared to V > 01, as well as the maximum tension of the High Energy Tension rubber sheet of V > 01 Stiff provide for excellent energy transfer when the bat hits the ball, thus developing great speed. The open-pore, state-of-the-art 45° high-performance sponge which is slightly softer than in V > 01 provides for more control in your play (“Power & Balance concept”). With this new sponge / top rubber sheet combination, V > 01 Stiff enables extremely fast and spinny topspin strokes with an aggressive ball trajectory. Especially in mid-distance topspin rallies, the V > 01 Stiff rubber unfolds its full potential. The enormous tackiness of the High Energy Tension rubber additionally enables dangerous, variant-rich serves and magnificent control in over-the-table play.
- Pimples in
Reviews by user
-
-
Inner Force （Experience：４〜５ years） Arc is high!
-
2015/11/22
Since Tenaji is higher, I tried to put a Bikutasu 01 stiff of the rumors are similar. It had been rumored to be similar but is high arc than Tenaji! So you can very stable play. Speed is less but not losing the rotation, I think that further arc are two compatibility of very or rather easy to use, such as play can be at ease because of the high advantage is good rubber. However, when the arc becomes a little higher attacks, such as ... arc is too high curve drives, such of you will say that there is a disadvantage if there is an advantage, the height of the supposed arch of the original advantage now revenge It was. In addition, it was described above, but does not go out too much speed! So back is Madashimo case of fore it is recommended especially thick. So, you think you can use the height of the arc of this rubber is that it is a point. Compatibility is good think even with any racket. File Stark is I want to buy all means because the arc think is that it is high is famous as the rubber does not lose to it! Very good rubber! Also, to say the Gutchii, fore surface Tenaji 05 back surface seems Tenaji 64 like a sensation.
All Speed Spin Control
Racket recommended use Innerforce AL
-
-
-
Tugo Stable and rotating rubber
-
2024/01/12
Personally, I thought it was a manual rubber. So I think it's a rubber that you can fly with your own power. Although the lifespan is a little short, I had the impression that it rotates often. It's easy to put in a loop drive, and as I said earlier, it's a rubber that you can fly with your own power, so it's easy to put in even when you put too much force.
All Speed Spin Control Hardness Little soft
Racket recommended use Kenta Matsudaira ALC
-
-
-
Minmin （Experience：２〜３ years） It's dangerous if you use it too much
-
2023/09/09
V01 Stiff is easy to generate rotation and speed. However, I personally think that the one thing that concerns me is the short lifespan.
It says it's for hard hitters, but I felt it could be used by ordinary people, personally.
I don't recommend it to people who are confident in their swing.
But I think it's amazing what you can do for less than 5,000 yen, so if you're interested, why not give it a try?All Speed Spin Control Hardness Little soft
Racket recommended use SK Carbon
-
-
-
Takahashi Kebab （Experience：４〜５ years） Like Rakza 7. I didn't really understand the auto feeling.
-
2023/06/12
My favorite Rakza 7 felt a little hard, so I searched for a similar rubber that seemed a little softer and arrived at it. As a result, I bought a total of three times with a very good rubber. All foregrounds are 2.0 red. However, I felt that individual differences were significant.
The first one is a slightly soft Rakuza 7 (Rakuza 7EL?), and I was very impressed with the sharp drive of the Rakuza system even though it was soft. The second one was hard enough to feel almost the same shot feeling as Rakuza. (I felt that the rotation was a little weaker than Rakza. That's why I think it was easier to shoot a V-like straight ball and the ball speed was higher than Rakza.) I really liked this one. I actually liked it better than Rakza. It was great to get a sense of security on the Rakza platform and a V-type drive. The third one is lighter than the top two and feels quite soft when hit. (Softer than the first one, harder than the 7th soft) This shot feeling was uncomfortable, and it seemed that the rotation was not really applied. I don't have a specialty store near me, so I prefer to buy online, so I went back to Rakuza, but I highly recommend it to those who can buy while watching the weight at the store. The first one and the second one were really good, so I would like Rakza 7 users to use it once.All Speed Spin Control Hardness Little hard
Racket recommended use Waldner Senso Carbon
-
-
-
Waiting for Suuankou （Experience：４〜５ years） The amount of rotation is tenergy
-
2022/05/31
As you can see, the rotation of the drive hit with this rubber is wonderful. Although the speed is modest, it gives the impression that it can be pushed out by the amount of rotation. I think that blocks and counters are relatively easy to do and are very good rubber. The only drawback is its short life.
All Speed Spin Control Hardness Little hard
Racket recommended use ALBA
-
-
-
Prefectural tournament best 8 fierce （Experience：４〜５ years） The compatibility with the inner is excellent!
-
2021/12/12
First of all, it's the best.
I've been using it in the foreground for about a year, and it's very easy to use. Originally I used v01limber for Biscaria, but since the ball is too shallow, I made it stiff, but the outer was too hard and I changed it to the inner, which made it easier to use.
The recommended thickness is 2.0 mm.
Not recommended for outerwear.
It took me a week or two to get used to it.
You can also cut the serve.
I've used a lot of tools, but I recommend the rubber that fits the inner because it's the cheapest of the fasterc G-1, v15 extra, MX-S, Tenergy 19, and Laguza 7.
I don't think it is suitable for beginners. For those who are thinking of changing from a wood racket to a special material, V01stiff is recommended for the inner force layer ALC.All Speed Spin Control Hardness Little soft
Racket recommended use Innerforce Layer ALC
-
-
-
Galore （Experience：４〜５ years） A sense of stability!
-
2021/05/29
Max black is used for the foreground.
As you can see from the headline, the sense of stability is great. It feels like it fits on the table by drawing an arch line that is neither too high nor too low. However, it is easy to draw an arch line, so I think it will speed up a little.
In addition, because it is an authentic tension (?), It makes a clicking sound when driving and the shot feeling is good. Also, personally, I think it's okay to be a person who rubs and hits, or a person who bites and hits, but I think that a person who bites and hits needs a certain amount of impact.I think that it can be used from intermediate to top level than advanced.
All Speed Spin Control Hardness Little soft
Racket recommended use Innerforce Layer ALC
-
Related rubber
Rubber
Producer
Type
Racket
Producer
Grip
Review Ranking
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.
