tobimame's profile
| Gender | Male |
|---|---|
| Age | U40 |
| Experience | ４〜５ years |
User review
-
-
-
2021/01/29
The sponge hardness is slightly higher than that of GTT40, and I think this slight difference enhances versatility.
It speeds up to some extent, and thanks to the top sheet with a lot of rotation, you can hit a pretty good drive. Tsuttsuki and the tabletop are stable, and the serve is also reasonable. On the other hand, although other people have also reviewed it, the block is difficult to fit because it is easily pushed by the ball and is also affected by rotation.
If you get to know the higher-grade tension system (Hexa, Lakza, Super Ventus), you will not be satisfied, but the cost performance is the best. I think it is a standard rubber that can cover from the first piece for beginners to intermediate people.Overall Speed Spin Control Hardness Little soft
Recomend racket TIMBER 5 OFF
-
-
-
-
2021/01/29
Although it is a representative for beginners, andro's GTT is now easier to use and cheaper, and I think beginners can develop the form and feeling suitable for modern table tennis.
I thought that the Slaver series is a rubber that matches niche needs, such as combining it with a foreign rubber or using it in a cut. Since it is affected by the rotation of the opponent so much, it invites mistakes with the receive with the remaining rotation. Also, if you like a soft shot feeling, you will be addicted to it.Overall Speed Spin Control Hardness Soft
-
-
-
-
2021/02/06
I use it on both the fore and back. For its hardness, it has the power to push out after grasping, and the speed or the ball has elongation.
It is attached to a racket with a hard front plate, and I think that it is probably compatible. If you have a racket with a good ball, you may grab it too much and lose power or lose to the opponent's rotation.
Of course, the grip is perfect. The amount of rotation of the loop drive is abundant, and the speed drive is easy to hit from a high arch line to a low trajectory. The tabletop is stable, and the rotating serve is easy to cut.
It depends on the user's physical and racket, but I think that it is a rubber that has sufficient power and ease of use for intermediate users. It's so good, it's cheap, and it's 1.9 thick and 43g after cutting! I am happy that it is lightweight.Overall Speed Spin Control Hardness Little soft
-
-
-
-
2021/01/29
I think it is a standard rubber that is ideal for beginners to beginners and has a high cost performance. It has no habit and is easy to control, it takes a lot of spin, and it is possible to drive with a lot of rotation and Tsuttsuki. However, the power of the ball is hard to come out and the quality of the ball is light, and the speed of the meet and the counter is one step further. Because it is only 1.6 thick, it is easy to lose to the opponent's ball power. I think that it will be unsatisfactory when it gets to a certain extent. For GTT, 45 is fine from the beginning.
Overall Speed Spin Control Hardness Soft
Recomend racket TIMBER 5 OFF
-
-
-
-
2020/08/07
It is the impression that I used it for a month.
The control performance is the strongest. You can attack comfortably because you can get a moderate speed with a desired angle and trajectory such as a cross from the front center team.
What is divided according to preference is spin and shot feeling. Anyway, it's good to focus on driving, but there are some people who find it a little difficult to handle a slightly thicker grip on the bench or when servicing. Also, the shot feel is soft, so this is also a favorite.
I ideally used a moist material and a slightly thicker grip that fits in my hand, but I prefer a shot that is a little harder and more rigid. Basic performance is perfect, so I think Cospa is the best, including its good design.Overall Speed Spin Control Touch Hardness Little soft
-
Racket
Producer
Grip
Review Ranking
Rubber
Producer
Type
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.
