GRB Ganymede γ's profile
| Experience | ６〜１０ years |
|---|
-
Use racket, rubber
-
- Racket
- The interplay of a balsa core and advanced synthetic fiber technology enables high speed and hard...
-
User review
-
-
-
2019/05/06
I am playing with double-sided adhesive now.
Nevertheless, the weight of the rubber-incorporated racket is in the low 160g range in surprise. (I also put a side tape)
Well, there is a opinion that the racket is pushed when it is light and especially the racket is not heavy if it is sticky, but I have no opinion about this racket at all.
First of all, the swing speed is clearly increased, and the speed, rotation, and stretch are all aligned. In particular, with the fore-drive back drive, the opponent's block does not return easily.
There is no difficulty with the tabletop, and there are no problems with playing techniques such as smash and flick. Does the speed really feel like an outer?
If I say a weak point, it is a balsa, so I think that the feeling of hitting is only about being blurred compared to a normal racket.
Oh, so let's put on a side tape because it is balsa!Overall Speed Spin Control Touch Hardness Little hard
-
-
-
-
2019/01/04
I used red 2.0 on the back side.
So soft and spherical separation is fast, the block is easy to make the best. Speed is also fast, operability is outstanding. It might be the best prospect.
The backdrive took a tremendous turn as you spin and could push the opponent's block with just rotation. Hitting with a little meat, both speed and rotation can be compatible at a high level, but I felt that I felt a little bit of stability. (← I am sorry this is a technical problem)
Tsutsuki is comparable, but it will float a little as it will soften again. I think that it will be somehow if I adjust the hit point. In general, I think that there was no technology which it was difficult to say in general in the reception. Flick making use of the separation of the ball is a good feeling.
In general, it is a wonderful rubber without holes, but the price is a bit too expensive to keep using. It may be better to try using it for testing ...
Overall Speed Spin Control Hardness Soft
Recomend racket INNERFORCE LAYER ZLF
-
-
-
-
2019/01/04
Since the racket is not so hard, it looks good even if the rubber is stiff.
First of all, the ball comes out very much. If you let it dig into, the amount of rotation is incredibly high, even with a soft tension rubber it will take enough rotation to blow away the opponent's block with the drive (laugh)
However, is not it suitable for scraping like a tacky user of tick? I also thought. It is because the racket is soft. This may be individual differences.
I feel good hitting the hand well. There are lots of good points, such as ease of fineness of technology and ease of rotation, ease of use to dig into even if you can not get a bit strong impact.
I thought it was a wonderful racket.Overall Speed Spin Control Touch Hardness Little soft
-
-
-
-
2019/05/07
When I bought it, it was a very good rubber. We used for back, but speed of speed drive, depth were marvelous, and we entered small arch line and entered stably. When the back drive came in, it hardly returned.
Although Tsutsuki and the like float somewhat, since rotation takes place firmly, it was a ball that invites the other party's mistake on the contrary (laughs) The technology using the goodness of separation such as flicks and blocks is the best.However, it is the life expectancy. In the case of tension rubber, I always clean with a rubber cleaner and put a film. However, after two months, all speed drives that had been decided so far hit the net. I think that probably the hook falls and the arc disappears.
Personally, I felt that continuous use was tough.Overall Speed Spin Control Hardness Soft
Recomend racket INNERFORCE LAYER ZLF
-
Racket
Producer
Grip
Review Ranking
Rubber
Producer
Type
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.
