TRIPLE Double Extra
Everyone's rating |
[Hardness] Pretty soft [Performance] Spin and Control to have excellent |
Averages reviews points
- Speed:7.78
- Spin:9.5
- Control:8.83
-
Reviews of TRIPLE Double Extra. Players who use Rubber evaluate various points such as hardness of the sponge, speed, control, spin, and feel at impact thoroughly.(Page 3)
- Pimples in
Specifications
- Producer
- VICTAS
- Product code
- 200060
Reviews by user
-
-
Ponchi (Experience:6〜10 years) The amount of rotation is insignificant
-
It is the rubber I used before.
I used a racket with a better ball holding than Corbel, so I wanted the speed and power to be higher than the pressure obtained, because the amount of rotation was not half-baked, it was easy to block, etc.
I felt that the fore was ... for a soft racket.
I chose Fastark g1, but the compatibility was better at all.
There are many posts that say that the back fits better, but I think that's probably the case.
Although it is a rally type from the loop drive, I will try to purchase it again to see if it fits with the ALC.All Speed Spin Control Hardness Little hard
Racket recommended use TIMO BOLL CAF
-
-
-
saving maniac 3 (Experience:4〜5 years) New rubber different from madness
-
Used in the fore and back front.
I felt like I was going quite high from the fore. With drive bangs and counters, there is a metallic sound that is different from the tension rubber.
I felt very comfortable in the back. Because it is a rubber with a high arc, you can easily hit the opponent's low serve. Blocks and benches were also easy to do.
However, I feel that it falls into a category that flies considerably as an adhesive rubber. It was a crisp rubber, not a mushy feeling like crazy.
What I found difficult to handle was the weight.
Even with 2.0mm, it was about 53g after cutting.All Speed Spin Control Hardness Little hard
Racket recommended use Swat Power
-
-
-
drive idiot (Experience:2〜3 years) The strongest spin monster in cost performance
-
First of all, I thought that it would not lose to the downward rotation!
Enter anyway, and take a turn. It is easy to do on the table.
Especially easy to do techniques are downward rotation loop drive and flick.
It can be used both fore and back, and you can control the serve short.
Because it is difficult to get speed and it is easy to be affected by horizontal rotation,
I think it goes well with a fiber-based easy-to-fly racket.All Speed Spin Control Hardness Little hard
Racket recommended use REVOLDIA CNF
-
-
-
Jumping Ossan (Experience:6〜10 years) Rubber that can be used for games even if it is x in practice
-
As for the tabletop, it stops biting in both the fore and back, it is easy to control, you can carry the ball as you aim, and it cuts perfectly.
It is a fact that it gets tougher when you go down from the table, but if it is a front-end game, it is easy to receive as long as you hit the racket.
There is a problem with how to hit it, but it is a rubber that I would like people who like low trajectory to use.
However, in my case, the feel of the rubber changed from ticking to yawayawa in a week, and I could not play with adhesive (crying).All Speed Spin Control Hardness Little hard
Racket recommended use Barwell
-
-
-
Bulk Back rubber
-
I put it on the back, but it is the finest rubber. If you spin it, it will take as long as the opponent blows it away, and if you hit it, a reasonably fast ball will go. Until now, I was not good at tabletops, but after changing to this rubber, the accuracy of Chiquita and Tsuttsuki has improved. Even if you hit it in the same way, it will be messed up or not at all, and it will be rough in a good sense. This rubber is recommended for intermediate and advanced players who want to avoid back over mistakes and who want to take the initiative on the table.
All Speed Spin Control Hardness Little hard
Racket recommended use ZX-GEAR OUT
-
-
-
Anonymous (Experience:2〜3 years) Easy to use in adhesive
-
I usually use tension rubber, but I borrowed it from a friend and hit it lightly.
Adhesive ... There are quite a few, but there are more leopards. If you don't use the adhesive sheet, the adhesive will decrease immediately.
Long ball: A ball with a large amount of rotation, although there is little change that seems to be sticky.
Downward rotation drive ... Anyway, it goes up so it's easy to lift. If you hit it with the tension hitting method (usually G-1), it will be completely over.
It is. The loop also takes rotation, and the speed comes out firmly, so there is no complaint.
On the table ... The stop is adhesive, so it's easy to do normally. I'm not good at flicking, so I don't know. Chiquita gets caught
It was strong and very easy to do.
I felt the sheet was softer than I expected. However, the sponge is very hard. The hitting sound feels good.All Speed Spin Control Hardness Hard
Racket recommended use Zephyr2
-
-
-
Leopard (Experience:4〜5 years)
-
It is a comparison with the turbo blue of Kyo Leopard PRO. The weight is turbo blue. The hardness of turbo blue is also harder. Double extras have higher repulsion. As for how to hit afterwards, it is highly recommended to hit by rubbing with a sheet. Also, I personally thought that the back was pretty good, so maybe it was a rubber suitable for back (?). Also, I thought it was a very good rubber because it was easy to switch from tension rubber.
All Speed Spin Control Hardness Hard
Racket recommended use Zhang Jike ALC
-
Related rubber
Rubber
Producer
Type
Racket
Producer
Grip
Review Ranking
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.