TRIPLE Double Extra
Everyone's rating |
[Hardness] Pretty soft [Performance] Spin and Control to have excellent |
Averages reviews points
- Speed:7.69
- Spin:9.47
- Control:8.81
-
Reviews of TRIPLE Double Extra. Players who use Rubber evaluate various points such as hardness of the sponge, speed, control, spin, and feel at impact thoroughly.(Page 2)
- Pimples in
Specifications
- Producer
- VICTAS
- Product code
- 200060
Reviews by user
-
-
Genius Back Table Cutman (Experience:6〜10 years) Defensive rubber that is easy to suppress
-
I've been a cutman for less than 6 years since I started playing table tennis, and I've tried various tools, but I thought it was a rubber that was strong in general defensive techniques.
Yuto Muramatsu is a defensive racket that bounces quite a lot, so when combined with high tension, it is difficult to make cuts and broken stops bite into the sponge.
If you know how to bite into this rubber, you can cut it considerably and put out a short ball.
The difficulty is that it can hit Choridora on the offensive side, but it is light for the rotation and is useless.
Meat Uchiha has a pleasant sound, and the image is light and stalled for a metallic sound.
The sharpness of the cut is excellent and the suppression is effective, so no matter how much you bite into the sponge, it will not blow off.
Not recommendedAll Speed Spin Control Hardness Hard
Racket recommended use MURAMATSU YUTO 90th
-
-
-
Nikotaku (Experience:4〜5 years) Very easy to use once you get the hang of it
-
When I changed the racket to a bouncing one, the ball released faster, so I changed the rubber to a better ball holding one. The hardness of the sponge is quite hard, but unlike the leopard, the sheet is soft and the ball is gripped firmly, making it easy to use, and as a result, the compatibility with a hard racket was very good.
With a strong hit drive, no matter how many hits you hit, you can get a good ball over the net and on the table. You can hit it with confidence because it will rotate firmly and fall on the table.
The weak back side is sticky and easy to flip. I'm glad that I can lift it easily with a decent ball if I hit the back-to-down rotation drive that I was not good at a little.
The manufacturer says it is for top players, but if you are an original adhesive user and understand the characteristics of adhesive, I think that even beginners who are close to intermediate level will find it easy to use.All Speed Spin Control Hardness Hard
Racket recommended use GAUZY SL OFF
-
-
-
A person at a certain table tennis facility (Experience:6〜10 years) usually chai mule
-
Rotation takes place like Chailaba in any technology such as serve receive and drive.
As for the speed, it's not so fast like Chai Lava.
The hitting sound is crisp, and the so-called metallic sound is amazing.
I personally felt that the difference from other chailabas such as Kyo Leopard is that it is easy to handle.
We recommend using it for those who want to develop a sense of rotation and for the previous stage of The Chinese Rubber.All Speed Spin Control Hardness Hard
Racket recommended use ZX-GEAR OUT
-
-
-
Ponchi (Experience:6〜10 years) The amount of rotation is insignificant
-
It is the rubber I used before.
I used a racket with a better ball holding than Corbel, so I wanted the speed and power to be higher than the pressure obtained, because the amount of rotation was not half-baked, it was easy to block, etc.
I felt that the fore was ... for a soft racket.
I chose Fastark g1, but the compatibility was better at all.
There are many posts that say that the back fits better, but I think that's probably the case.
Although it is a rally type from the loop drive, I will try to purchase it again to see if it fits with the ALC.All Speed Spin Control Hardness Little hard
Racket recommended use TIMO BOLL CAF
-
-
-
saving maniac 3 (Experience:4〜5 years) New rubber different from madness
-
Used in the fore and back front.
I felt like I was going quite high from the fore. With drive bangs and counters, there is a metallic sound that is different from the tension rubber.
I felt very comfortable in the back. Because it is a rubber with a high arc, you can easily hit the opponent's low serve. Blocks and benches were also easy to do.
However, I feel that it falls into a category that flies considerably as an adhesive rubber. It was a crisp rubber, not a mushy feeling like crazy.
What I found difficult to handle was the weight.
Even with 2.0mm, it was about 53g after cutting.All Speed Spin Control Hardness Little hard
Racket recommended use Swat Power
-
-
-
drive idiot (Experience:2〜3 years) The strongest spin monster in cost performance
-
First of all, I thought that it would not lose to the downward rotation!
Enter anyway, and take a turn. It is easy to do on the table.
Especially easy to do techniques are downward rotation loop drive and flick.
It can be used both fore and back, and you can control the serve short.
Because it is difficult to get speed and it is easy to be affected by horizontal rotation,
I think it goes well with a fiber-based easy-to-fly racket.All Speed Spin Control Hardness Little hard
Racket recommended use REVOLDIA CNF
-
-
-
Jumping Ossan (Experience:6〜10 years) Rubber that can be used for games even if it is x in practice
-
As for the tabletop, it stops biting in both the fore and back, it is easy to control, you can carry the ball as you aim, and it cuts perfectly.
It is a fact that it gets tougher when you go down from the table, but if it is a front-end game, it is easy to receive as long as you hit the racket.
There is a problem with how to hit it, but it is a rubber that I would like people who like low trajectory to use.
However, in my case, the feel of the rubber changed from ticking to yawayawa in a week, and I could not play with adhesive (crying).All Speed Spin Control Hardness Little hard
Racket recommended use Barwell
-
Related rubber
Rubber
Producer
Type
Racket
Producer
Grip
Review Ranking
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.