Mature cut man 3's profile
Gender | Male |
---|---|
Age | U40 |
Experience | More than 20 years |
-
Use racket, rubber
-
- Racket
- The Japanese shooting star Yuto Muramatsu was a key contributor to the development of this high-e...
-
- Rubber (Front)
- The VS > 402 Limber is the softest variant of the tacky VICTAS VS series. The tacky, elastic top ...
-
- Rubber (Back)
- Super Spinpips-21 has the same unique top sheet as the Super Spinpips, but is combined with the m...
-
User review
-
-
I used Crazy neo3 on a regular basis, but I chose it as the next rubber because of the weakness of my strength. It is an impression that I found the best rubber. In the case of frenzy, the sticking was strong, so when you attacked with a drive, you needed power to swing. This rubber can hit an early drive with a low arc line even at 80% force. Although the cut strikes the impression that it is restrained and the amount of rotation is inferior to madness, it sticks with control and ease of restraint. When you want to go to a decision, even if you hit it with a snap or rub it, there are few over errors. Recommended rubber for those who want to attack with cutman.
Overall Speed Spin Control Hardness Soft
Recomend racket YUTO MURAMATSU
-
-
I used it as the fore face of Cutman. The balance is surprisingly good and the cuts do not float. I think that it is easy to control because the sponge is soft and has a moderately long ball. There is the speed of the cut and it is an impression that can be taken deep in the table. Because it can attack even away from the stand, it seems to be usable as a cutman rubber that combines attack and defense. However, since the amount of spin is a little short, I would like to expect the newly released “Ligan Spin”.
Overall Speed Spin Control Hardness Little soft
Recomend racket MAGIC WALL
-
-
I use it mainly on the fore side of the cut. The sponge is sticky and unexpectedly trapped, so the cut is super spin and stable. VS drive makes it easy to make a strategy because cuts can be sent deep. Tsuttsuki can be cut completely when applied thinly using adhesive, but it will be over if you make a mistake in the angle, so practice is necessary. When turning to an attack, you can get a speed that can be determined with a single blow, and it is also recommended for a half-attacked cutman because you can also win inquiries.
Overall Speed Spin Control Hardness Little hard
Recomend racket MAGIC WALL
-
-
Comment as a cutman. Kyo Leopard NEO3 is pasted on the fore side, and Glass Detex 0.5mm is pasted on the back side. Both rubbers are relatively easy to bounce, but the cut ball fits deep in the base for fun. I think that the suppression is effective because there is a special material in the racket. On the other hand, if you attack, it will bounce well, which makes it strange. It takes time to get used to, but I feel that it is a good racket for a cutman who wants to both attack and defend. By the way, when I put a thin Tachynes chop on the back surface, it is good because the processing on the table stops short, but the cut from a distant position does not cross the net. If you are in the main battle of the cut, I think that you should choose a rubber with good momentum.
Overall Speed Spin Control Touch Hardness Little hard
Recommend rubber(Front) NEO HURRICANE 3
Recommend rubber(Back) Grass D.tecS
-
-
I used it in the main battle for about a year. The other day I made a swing and it broke from the root. I'm glad I wasn't playing, but I was surprised to see such a weak racket for the first time. Although it is a cutman, it is disappointing because it has a good feel and ease of attack. If you have the money, give it a try, but honestly I can't recommend it.
Overall Speed Spin Control Touch Hardness Little hard
Recommend rubber(Front) V>15 Extra
Recommend rubber(Back) SUPER DO Knuckle (Short pimples)
Racket
Producer
Grip
Review Ranking
Rubber
Producer
Type
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.