ELFRARK [Discontinued]
| Everyone's rating |
[Hardness] Medium hardness [Performance] Control and Speed to have excellent |
(Click to zoom the photo)
Averages reviews points
- Speed:5.71
- Spin:5
- Control:8
-
Now to the conventional rubber in to be placed at intervals of spread a small particle in a slightly higher compared to the table soft rubber with a table soft rubber and grain high rubber both properties. The user can be used in the same sense as the traditional table soft rubber, but the opponent is possible to send a change of ball, such as grain and high rubber. This rubber has excellent balance of sufficient speed smash also possible offense and defense at the time of swipe.
- Short pimples
Reviews by user
-
-
sand （Experience：２〜３ years） Degraded version of the knuckle
-
2020/02/26
I tried using it with my sister.
Fore side V07Stiff (thick) used on the back side with ELFLAK (thin).
For me it is very easy to do, the cut is good, and the operability is high, so it is easy to send the changing ball, so it is wonderful.
If you use the change table software at the beginning, it is enough performance,
I think that it is easy to use especially for girls regardless of age (^ ▽ ^)
However, this rubber has rivals. that is. . .
Attack 8 and a knuckle!
To be honest, El Flark is inferior in performance to these two rubbers.
In order of level. El Flark → Dnuckle → Attack 8
But Elflark is the easiest to use at first among the three rubbers.
Before using Attack 8 or a knuckle, it is better to get used to the sensation of the variation table software with El Flark.
I hope it will be helpful for choosing tools (^ ^)All Speed Spin Control Hardness Little soft
Racket recommended use SWEDEN CLASSIC
-
-
-
Acquaintance of peppers （Experience：１１〜２０ years） can do anything
-
2020/03/25
I used the inside for the back. Personally, the best thing was that my knuckle cut flew slowly and my opponent made an over-miss with a really non-rotating ball called a knuckle. Tsuttsuki's rotation does not depend on it, but I think it is hard to be hit because it can be set low.
All Speed Spin Control Hardness Soft
-
-
-
Corn Grain height to be hit, table to be stopped
-
2019/08/31
So-called half grain
Backhand that is difficult to do with grain height
Although it is not cut from the grain, it can be cut block like a grain.From a certain level, you can't win by just stopping with a grain
I'll have to hit it, but it's hard to hit with a grainThis rubber drastically reduces mistakes
A thick rubber is close to the front
Thin rubber is closer to the grainEasy to use
All Speed Spin Control Hardness Little hard
-
-
-
Shark （Experience：１１〜２０ years） Changing table that rarely chooses people
-
2018/07/05
As a table software, a ball with a fairly good harvest comes back.
If you look as grain height there is an unexpected speed, and the ball with the rotation is returned.
Although there is no extreme performance in the change table, grain height as feeling,
It is a rubber which made it easy to handle while leaving each characteristic performance.It is a linear trajectory to use in cutting.
Although the grain height specific change is not felt much,
I did not cut the cut control was easy to do.All Speed Spin Control Hardness Little hard
-
-
-
Cutman （Experience：４〜５ years） It's a nice rubber
-
2018/02/19
I use it in the back in the cut man.
If you think that it is a table and you use it
If you use it thinking that it is high grain height
Cut is an outstanding control
You can be attacked by the back from the receive, and the back smash from the keeper is also powerful enough!
Easy to block!
You can hit the image with a grasping ball firmly.
Please try by all meansAll Speed Spin Control Hardness Little hard
Racket recommended use Astron yellow
-
-
-
Power effect （Experience：６〜１０ years）
-
2017/05/24
Although it was a pen grain height, it is perfect for changing attacks. Perfect for defense
All Speed Spin Control Hardness Little hard
Racket recommended use Swat
-
-
-
TINKER BELL （Experience：４〜５ years） Chance manufacturer
-
2016/12/24
Is Senkei that sometimes is reversed to subject the attack of the drive to chance make a change System Table software is.
This rubber is easy to very control, back and forth and left and right on the platform, or paying stopped or, knuckle and rotation, is a good place is a place that can be used in the technical, such as Petit drive.You can also crackling attack like the street Table software, which is also after catchphrase.
(Yourself use thick, back software V> 15!)
Although there is written by use thing anyone, is mastering beginners as his impressions in the table soft experience premise is to Nari beginners, middle-advanced was in the respective level in Nari middle senior I felt that rubber that can be.It is very easy to use, but I do not mean in any way say that for beginners! However, I think or was only purpose that invites mistakes of the other party, the kana not fit for those who are seeking to meet and smash of tension table par.
Last chance make + α.While the chance makeup, which also serves as an attack by the change system table software, of the type that kill in the back software
I think that is the person fit regardless of level.
Since floats and argue a point just shed Saab knuckle-based care only here!All Speed Spin Control Hardness Little hard
Racket recommended use Yoshida Kaii CS
-
Related rubber
Rubber
Producer
Type
Racket
Producer
Grip
Review Ranking
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.
