Shark's profile
| Gender | Male |
|---|---|
| Age | U20 |
| Experience | １１〜２０ years |
-
Use racket, rubber
-
- Racket
-
- Rubber (Front)
-
- Rubber (Back)
- Designed for the aggressive chopper, Feint Long III features a softer more flexible top sheet com...
-
User review
-
-
-
2018/06/24
Horizontal series with sponge (hard) ver.
I used a thin one.Sponge color is light gray.
Compared with Feint Long 3 (white) and Curl P - 1 R (Yellow) which were compared in late surgery
A sponge with a color that I have never seen before.
As it is contained in the product name 55, it is quite hard sponge.
Grains also become stiff.I felt it was taken as a performance between Carl P - 1 R and Feint Long 3.
Compared to Carl P - 1 R, the change is mild but the ease of use has increased.
Since it fights better than Feinturongu 3, I was concerned about over-miss at first.Those who are using Feinto Long 3 and feel unsatisfactory to the change of cut,
I am using Curl P - 1 R and feeling difficult to use, but I recommend it to those who do not want to compromise the change of cut.Overall Speed Spin Control Hardness Little hard
-
-
-
-
2018/07/05
The drive bounces, the cut does not bounce.
It is a rubber that embodies Cutman's hope.It was an image with a firm rotation,
It is a dilemma of spin type tension rubber,
Rotation is applied = There is no feeling that it is susceptible to the influence of the opponent's rotation.Somewhat speaking it is strong against the pair,
Cramped sponge combined, few things lost to opponent's rotation.I think that it is a rubber that feels less habitable even in tension rubber.
Overall Speed Spin Control Hardness Little hard
-
-
-
-
2017/12/20
I am using 0.5 mm.
·cut
The influence of rotation is small, but because there is momentum
Over-misses will increase while you are not used.
However, change / inversion ability is top class among grain height.· Tsukkisu / push
Tsutsuki to cut is difficult.
Because it becomes basically knuckle unless you are conscious,
The opponent will often be targeted.Push can be sharp balls as soon as 0.5 mm.
Just because it lacks stability, returning aim at the course is difficult.
It is a rubber that throws away the sense of stability and is swinging all the way to change.
Although it is neck that it is difficult to cut the tsutsuki considerably by 0.5 mm,
To that extent, the high degree of change and inversion ability is very attractive as mentioned above.I think I am upward compatible with Carl P-1 in myself.
It is recommended for those who are aiming for aggressive cut man!Overall Speed Spin Control Hardness Soft
-
-
-
2019/06/06
As it is a table standard, it can be used for large balls.
When you hit a ball, the change is amazing, and you'll be slowed down a lot, so it was often the case that you thought it was "over?"
It is recommended for everyone who puts a large-ball, cut-type main battle type and defensive weight.Overall Speed Spin Control Hardness Hard
-
-
-
2018/07/05
As a table software, a ball with a fairly good harvest comes back.
If you look as grain height there is an unexpected speed, and the ball with the rotation is returned.
Although there is no extreme performance in the change table, grain height as feeling,
It is a rubber which made it easy to handle while leaving each characteristic performance.It is a linear trajectory to use in cutting.
Although the grain height specific change is not felt much,
I did not cut the cut control was easy to do.Overall Speed Spin Control Hardness Little hard
-
Racket
Producer
Grip
Review Ranking
Rubber
Producer
Type
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.
