SONIC AR

Everyone's rating

[Hardness] Little soft
[Performance] Speed and Control to have excellent

(Click to zoom the photo)

Averages reviews points

Rating: 8.5 / 10

14 reviews

Speed:8.86
Spin:6.71
Control:7.86

: ●BLACK、RED

Short pimples

Specifications

Producer: Nittaku

Product code: NR-8585

Reviews by user

Post a review

All Month

Spring （Experience：１１〜２０ years） Hammond FA Speed renews its debut

I used thick.
It feels a little grainy compared to Hammond FA Speed. Sonic AR feels harder.
The molded part is very compact, which seems to be a great consideration for pen holder players.
Because it is harder, the meat can fly faster than Hammond FA Speed.
However, I felt that the knuckle was a little hard to put out. Is it because the grain of the grain has become stronger or the spacing has become smaller?
The feeling of slipping has been reduced, and the technology of rotating systems such as drives has become more stable.
Even players who usually use the back software said that the ball was hard to fall and was easy to hit.
Since the way of flight is milder than Moristo SP, it seems to be good as a rubber to choose first if you are thinking of switching from back software or rotation system software to speed system software.

See original review Hide original review

2020/03/06

All	8/10
Speed	7
Spin	5
Control	8
Hardness	Little soft

Racket recommended use CARBONADO 45

Was this review helpful to you? Like!

18

Fore Table （Experience：４〜５ years） The best table software!

I especially recommend this club to players who play fast from the front. It has a strong bounce and is very easy to hit at an angle! Even those who don't have much power can hit good balls with a compact swing! What's more, it had a lot of hook and was very easy to vary the speed. However, since it was difficult to hit a knuckle, it's not really suitable for players who want to win with a change of pace even on the back court.

See original review Hide original review

2026/01/14

All	10/10
Speed	10
Spin	9
Control	8
Hardness	Little soft

Racket recommended use Innerforce ZLC

Was this review helpful to you? Like!

0

Former Single-Sided Pen Man （Experience：１１〜２０ years） Easier to handle than tension

I use it for the forehand side of the mid-pen. Perhaps it's because the racket doesn't have much bounce, but it doesn't fly very far with light hits, but with a strong swing it seems to gain a decent amount of speed. The spin is easy to apply for a speed-type rubber, and it does have a moderate amount of spin.
Rather than being a rubber that's all about distance, as advertised, I think it's a well-balanced, easy-to-use rubber.
That's because it's high elasticity rather than tension. It's a good rubber that's easy to vary the speed of.

See original review Hide original review

2025/12/19

All	8/10
Speed	7
Spin	8
Control	9
Hardness	Little soft

Racket recommended use ALLROUND EVOLUTION

Was this review helpful to you? Like!

0

tencha

Thick use
Easy to understand the feeling of impact and easy to operate ◎
Flat system feels good ◎
It feels good with less slippage when you put it on.
Blocks will fly too much if there is no technology to suppress them △
Although it is a straight trajectory, you can also make an arc. ○ ○
However, it will be a straightforward sphere. .. .. △
Serve is easier to rotate than the average in the table ◎
Strong drive feels good to escape and counter ○

See original review Hide original review

2022/07/11

All	8/10
Speed	8
Spin	7
Control	7
Hardness	Little soft

Racket recommended use Rapid

Was this review helpful to you? Like!

6

Motoyan （Experience：More than ２０ years） It's fast even if it's not tension

Although it is non-tensioned, the speed at the time of just meeting is more than tension.
Use the third "thickness" from the top for the thickness. The grains are small and easy to control.
Is the rotation medium in the table software? Even so, you can make a rotation that makes you make a net mistake with the lower rotation service.
The phrase "Skip the table software and pick it up!" Is correct on one side, but I think it's a fairly well-balanced rubber.

See original review Hide original review

2022/07/11

All	8/10
Speed	9
Spin	7
Control	8
Hardness	Little soft

Racket recommended use AQUA BLADE ROUND Ⅰ

Was this review helpful to you? Like!

6

Equipment refugees （Experience：２〜３ years） One hit love

The inside is used as a back for Cutman.

It is non-tensioned, but it is as fast as or faster than tension. And there is also operability and ball holding that seems to be non-tension.
The pleasant sound when you meet is also good.

It bounces a little for Cutman, but since the sponge is soft, it is relatively easy to rub it on the sheet surface, and it takes a lot of rotation.
If you can't afford to rub it, cut it vertically like a cut short, and you'll get an unpleasant cut that's hard to tell if it's cut or knuckle.

It's not a rubber in the category that sells, but I think it's a masterpiece where you can't find any bad points.

See original review Hide original review

2022/01/18

All	10/10
Speed	10
Spin	8
Control	9
Hardness	Little soft

Racket recommended use 7P-2A.DF

Was this review helpful to you? Like!

6

Kyu-chan （Experience：１１〜２０ years） Same experience as Hammond FA

I was using Hammond FA and was curious about the new rubber, so I tried using it.
It looked smaller than the Hammond FA.
I compared it with the Hammond FA, but the momentum was about the same and I couldn't tell any difference.
I think it's easy to do on the table because it doesn't fly too much.
If you are using Hammond FA, maybe you should choose the cheaper one and buy it? ??

Rubber that has been used in the past
・ V102
・ V103
・ Hammond FA
・ Sonic AR
・ Super Spin Pips
・ Spectrum
・ Double Happiness Shanghai's rotation system (I don't remember because I was in elementary school)

See original review Hide original review