uwhede9865's profile
| Gender | Male |
|---|---|
| Age | U40 |
| Experience | More than 20 years |
User review
-
-
-
2024/03/20
Red Max, 51 g, 44.5°
Tena 05 special thickness is 48 g, 44.6
- Extremely easy to handle and upwardly compatible with the slightly heavier Tena 05 or Rosena! ?
・Easier to counter than Tenergy!
・Fusion of Tenergy and German rubber!
I thought it would be Tena 05 if I were to compare it instead of Tena 05 Hard.
I think it's more like a spring sponge because it's easier to dig in than its hardness.
When I say "like", I mean in terms of weight, it's heavier compared to the Butterfly.
I think the lifespan is about the same or slightly shorter.
It is probably the cheapest among the rubbers that are currently on sale and have Tenergy-like performance.
I also have a review on my blog, so please refer to it.Overall Speed Spin Control Hardness Little hard
Recomend racket LIMBAINNER
-
-
-
-
2024/03/19
max, black.
74g → 52g
Shore C hardness meter measured from the seat side: 42.8°
D05: 48g, 50.0°
T05: 47g, 44.6°1. Not only the sponge but also the seat is rubber that makes you feel like you're trying to grab the ball! Recommended for those who drive with low RBI!
2. The arch line is raised, making it easier to hit downward rotation!
3. Counter drive is extremely easy!
Adhesive rubber is popular these days, but I think it's a rubber that grips the ball tremendously and won't let you down when you want to hit the ball and drive like a European player.
I have also reviewed it on my blog, so please refer to it.Overall Speed Spin Control Hardness Little hard
Recomend racket ALNADE INNER
-
-
-
-
2024/11/15
Black Max, 53 g, 50.9°
China Kage is 57 g, 50.5°
D09C is 50 g, 50.8°
・A lively sticky tension rubber! 09C × Chinese sticky rubber = Jikihai C55
・Even though it's a sticky rubber, the ball is fast!
・Strong arc and quirky ball, typical of a sticky rubber!
An unprecedented contradictory slight sticky tension rubber, this rubber has speed, spin, and quirks. Recommended for those who are dissatisfied with the lack of quirks and lightness of 09C. The sheet has a slight adhesive force, but it is designed to be softer than sponge and closer to Kyohyo. It is easy to make loop drives, and even when it goes down, it is easy to freely hit from spinning to speed drives. The sticky rubber's unique mid-court drive does not stall, and it is easy to hit drives that extend on the opponent's court! I changed from China Kage to Jikihai C55.
I have also reviewed it on my blog (https://katsuo000.com/), so please refer to it.Overall Speed Spin Control Hardness Little hard
Recomend racket Tomokazu Harimoto Innerforce SUPER ALC
-
-
-
-
2024/03/19
FL, 86g
・Right in the middle of the trendy inner racket!
・The blade area is regular and suitable for backhand play!
- 5.6 mm blade thickness provides excellent stability!
I think the carbon is ultra-thin carbon rather than ALC, but you can feel the ball better than ultra-thin carbon such as Yasaka, and you can hit it with almost the same feel as ALC or ZLC. I imagine it's because the wood is of high quality and has a high density, but I'm not really sure. However, I guarantee that it is a racket with performance that is worth the price.
I have only purchased one from this brand, but the quality is quite high as it is often advertised on Table Tennis Kingdom.
I'm thinking of buying the Maple S innerwear that I'm personally interested in someday.
Since it is an upper plate limber, the feel at impact is guaranteed, and I use Mizuno's Fortius FT RE.If you are looking for quickness and fast feeling with a carbon racket, this racket is quite good. On the other hand, if you're looking for distance, it's thin and doesn't bounce, so I think it's easy to receive, but if the rally continues, you might feel a little lacking in power.
I think it's the best wood racket in Japan!Overall Speed Spin Control Touch Hardness Little hard
Recommend rubber(Front) OMEGA VII China Ying
Recommend rubber(Back) DIGNICS 05
-
-
-
-
2024/12/29
FL with a board thickness of 5.9 mm, 158 x 152 mm, and 88 g.
It was an easy-to-use racket that could be switched to the upper board limba without any discomfort.
The fact that it was so easy to use on the first use means that if it absorbs sweat and moisture, the feel of the hit will become softer and it can be handled with a feel that is quite similar to that of wood.
The SALC bounced well, and the sound in the hand was good enough that I could hit it straight in the direction of the vector I imagined!
Despite the large blade area and weight, it was a blade that I felt was quite easy to handle.
The only thing was that the forehand shot had a longer distance than I expected, and the core material was kiri? It felt like the ball was slipping out a little, which I felt was a matter of personal preference.
The backhand was quite good, and I could put pressure on my opponent with speed, and it was also extremely stable.
It was a good racket that was not at all unruly, and could put pressure on my opponent with speed greater than ALC while still being stable.
I have also reviewed it on my blog, so please take a look.
https://katsuo000.com/review_harimoto_tomokazu_innerforce_salc/Overall Speed Spin Control Touch Hardness Little soft
Recommend rubber(Front) JEKYLL&HYDE C55.0
Recommend rubber(Back) DIGNICS 05
-
Racket
Producer
Grip
Review Ranking
Rubber
Producer
Type
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.
