Rising Dragon
| Everyone's rating |
[Hardness] Little hard [Performance] Spin and Speed to have excellent |
(Click to zoom the photo)
Averages reviews points
- Speed:8.26
- Spin:8.77
- Control:7.87
-
With the new rubber RISING DRAGON Yasaka has successfully combined not only the advantages of the chinese sticky surface but also the renown qualities of speed and touch from japanese rubber technology.
RISING DRAGON offers a new dimension to your game as it is easy to make both sharp chop returns and power drives with good control.
- Pimples in
Players use Rising Dragon
Reviews by user
-
-
Medium pen Uraura haste （Experience：１１〜２０ years）
-
2016/07/12
Hardness is in the pressure-sensitive rubber in about Rakuza X and file Stark G-1 soft, sheet not be a sponge also a degree of paranoid, but as the feeling that struck was using the original adhesive where such celestial poles painted the speed glue glue and although the transition to the spin system tension dissatisfaction comes to those who have been using much China adhesive less is fit now pressure-sensitive rubber likeness I use ShoRyu to try because the feeling was unpleasant to slide when rubbed with absolutely surface in the abolition do you think, I feel good I but I think close to the tension rubber rather than a little soft adhesive rubber because I often use (Takifaiya or triple speed, etc.) love this rubber adhesive rubber made without problems Vita stop stop also , it is recommended when you migrate to the adhesive from the spin tension
All Speed Spin Control Hardness Little hard
Racket recommended use INFINITY VPS V
-
-
-
katsuo000_2 （Experience：More than ２０ years） Light but sticky shot feeling and arch line!
-
2022/05/02
Black, extra thick.
62 g → 43 g
Measured from the sheet side, shore c hardness tester 42.4 °
D09C: 50g, 50.8 °
Rakuza Z EH: 55g, 46.5 °
1. After all, the adhesive tension that bounces!
2. Light!
3. Light but sticky shot feeling and arch line!
It was quite light and worrisome. It's still light, so depending on the racket, the ball may be lighter. If you are a Yasaka user, I think that it is a rubber that you will want to stick on 7 plywood such as Mabayashi Extra Special. I think that it is easy to bounce and handle, and it is often the case that the opponent is not very familiar with it, but I think that it is also a rubber that is easy to feel that it is a little defeated by the current plastic ball with old rubber. It seemed that the ball would be light enough to be countered if it wasn't compatible.
We also review it on our blog, so please refer to it.All Speed Spin Control Hardness Little soft
Racket recommended use REINFORCE AC
-
-
-
Tennen Sui This is for those who cannot master Chinese rubber
-
2022/01/20
(Fore hit)
It feels like hitting with ordinary hard rubber.
(drive)
If it is an image of shaking a little upward while hitting it, it feels stable. It will fall off if you rub it like a grip tension rubber.
The shot feeling is not so much.
(Downward drive)
It's easy to lift and do. It seems that it will be difficult for the other party to take it due to changes. It feels like you can put out a speed ball when you want to.
(Bench)
The stop often stops because there is only stickiness. It feels like the flicks fly well and it helps. Chiquita can also be done firmly.
"summary"
I tried using it in the back, but it felt easy to use in the back. It weighs only 48g and is easy to swing. The bad thing is that there are no habit balls at all and the balls are released quickly. I would like you to refer to it.All Speed Spin Control Hardness Hard
-
-
-
Seiya （Experience：２〜３ years） Easy-to-use adhesive tension
-
2021/11/28
It's my main rubber right now! The racket is Lean Force SI with Fastark G1 on the back. The total weight is 186 grams, which is light for stickiness, and my Shoryu individual was 47 grams! I recommend it!
All Speed Spin Control Hardness Hard
Racket recommended use REINFORCE SI
-
-
-
Tenergy is delicious ♡ （Experience：１１〜２０ years） It ’s harder than G-1.
-
2021/11/01
Some people say that the hardness is about G-1 or Rakuza X, and I bought it because it met the conditions with the rubber I was looking for, but it was completely harder than G-1 and Rakuza. is.
All Speed Spin Control Hardness Hard
Racket recommended use Innerforce Layer ZLC
-
-
-
Anonymous （Experience：２〜３ years） Shoryu is odd
-
2021/09/20
I changed from Nittaku. To be honest, it's hard. However, the speed is very high and the arc line is high. I put it on the Arnado inner, but there were too many mountains and there were many over mistakes at first. If I could get used to it, it would be easy to break it down into crosses and straights, and I was able to secure the amount of rotation. It's easy to counter and serve well. I thought it was a rubber that does not choose a racket. Is it the ideal step-up from the Mark V series to Rakuza 9 and 7 software, Kiryu and Shoryu?
All Speed Spin Control Hardness Little hard
Racket recommended use ALNADE INNER
-
-
-
Xu Shangnin （Experience：２〜３ years） Good rubber
-
2021/09/05
I heard that Kami Takuya is using it, so I tried using it on both sides Arnado. I thought this rubber was a very good rubber. While it has adhesive characteristics such as Tsuttsuki, stops often stop, and blocks also stop, I think that the place where it bounces, which is a characteristic of tension, is also good.
All Speed Spin Control Hardness Little hard
Racket recommended use ALNADE
-
Rubber
Producer
Type
Racket
Producer
Grip
Review Ranking
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.
