Carl P-3 software
| Everyone's rating |
[Hardness] Medium hardness [Performance] Control and Speed to have excellent |
(Click to zoom the photo)
Averages reviews points
- Speed:5.36
- Spin:5
- Control:8.43
- Type also emphasized thick sense of stability at lower grain
-
Thick at a lower grain shape, stability of height also grain height of the features. In addition to the better-than-expected change, also quite useful to the knuckle of the attack. Best to mix type weaving Tsubudaka beginners and offense and defense.
- Single
- Long pimples
Players use Carl P-3 software
Reviews by user
-
-
-
2019/07/17
Within the grain height it is a little quick and stable. It changes even if it cuts, but the change at the time of pushing is great. I have a ball of knuckles to be shaken.
It is recommended for people who want to use grain height but are not the cutman but who want to use grain height for the first time.All Speed Spin Control Hardness Little soft
-
-
-
Surarin （Experience：１１〜２０ years） Aggressive grain height.
-
2024/11/16
I use the ox for my backhand.
With underspin and a drive using your wrist slightly away from your body, the ball will lift up.
If you push the ball from about 7 o'clock to about 12 o'clock in one go, you can hit a fake drive, or a knuckle drive.
For strong drives, you can cover the ball slightly from above with the face of the club and perform a cut block for a nasty return.
For the backhand, you can use a fake drive, underspin block, hit on top, and push to hit the ball up, then hit it with a forehand.All Speed Spin Control Hardness Little soft
Racket recommended use GORIKI
-
-
-
Grain use （Experience：２〜３ years） The block is...
-
2024/07/16
I put ox on it.
The control is good, but I can't hold it when a powerful drive comes. The push is good.All Speed Spin Control Hardness Little soft
Racket recommended use FIRE FALL FC
-
-
-
553 Cutman （Experience：１１〜２０ years）
-
2023/11/09
Block: It cuts pretty well.
Cut: The amount of rotation is lower than p4 and p1.
Tsutsuki: It's a little off.
Push: Fast and stable.
Overall evaluation: The amount of rotation is average, but the stability is amazing. Recommended for beginners.All Speed Spin Control Hardness Soft
Racket recommended use NI XIA LIAN The LNI XIA LIAN
-
-
-
Please stop YG （Experience：６〜１０ years） Easy to use anyway.
-
2023/07/08
For three years in junior high school, I used this rubber and went to the prefectural tournament as a group. I was aiming for a smash, and I was hitting with a sense of the opponent's sense and timing. It is highly recommended for those who want to start with grain height and want to change the battle style, as grain height tactics can be done with this one piece. There are many people who give knuckles that are surprisingly easy to put out as a good point, but I will give you a push that is sharp and neatly fits on the table if you thoroughly practice the basics such as form, timing, and racket angle.
All Speed Spin Control Hardness Soft
Racket recommended use Swat
-
-
-
Yuu. Cutman （Experience：２〜３ years） Easy-to-use royal road grain height
-
2023/05/29
Compared to Carl P1, this rubber is less prone to irregular changes, but it is very easy to use because the grains easily fall down. I tried hitting with a thin sponge, but the cut block stops, and the push tends to rotate upwards, making it a little arc and stable.
I also tried cutting. I'm usually a front cut man, so I can't cut much when I use grain height, but even I was able to cut quite a bit.
It is highly recommended for those who use grain height for the first time!All Speed Spin Control Hardness Little soft
Racket recommended use Swat Carbon
-
-
-
Heterogeneous man
-
2022/01/18
The control works very well. Pushing is also easy. I think it is a very good rubber for beginners.
All Speed Spin Control Hardness Hard
Racket recommended use Innerforce Layer ALC
-
Related rubber
Rubber
Producer
Type
Racket
Producer
Grip
Review Ranking
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.
