Equipment refugees's profile
Gender | Male |
---|---|
Age | U50 |
Experience | 2〜3 years |
User review
-
-
A us is used for the back surface of Liberta Willow.
It was my first anti-rubber, but I was surprised not to jump. Before you get used to it, it's difficult to get over the net unless the other party hits you.
It is almost unaffected by the rotation of the other party. Even with a loop drive, if you hold it down a little, you can jump low.
It feels like the one who spins from himself is just a little when the opponent's bang bites into the rubber well.
Regarding the reversing ability, I thought it was more difficult than the grain.As a whole, you can't expect to be able to return with a strong reverse rotation, so if you are accustomed to the trajectory of the cut that "a low ball does not fall and crosses the net", you will hit the net at first. It requires unique control.
Sound is worth mentioning. If the sponge is too soft and thin, the feel of wood will come out as it is, and a loud sound will come out with a hard shot feeling. This really feels good.
It is clearly different from the sound of the rubber on the fore side, but it seems that the anti-ball is difficult to hit even if you know it, so let's hit it comfortably.
Overall Speed Spin Control Hardness Soft
Recomend racket LIBERTA WILLOW
-
-
We went inside on the fore side of Liberta Willow. (Back is Carl P-4 Gokuus)
If the sponge of the tackiness chop was made harder by the TACHINES CHOP 2, the sponge would remain soft and the seat hardened would be called rev spin. Also, there is almost no stickiness, and the sheet itself is strongly caught.
It has the same control performance as a tackiness chop, but is less susceptible to the opponent's rotation, and has the sensation of hitting with a soft rubber front.
However, if you click it, it will rotate like a rotating tension.
Even if it is plugged in and you can't afford to spin, it won't bounce, so if you hit it, you'll get in. (This is surprisingly important.)
The attack seems to be minimal or not, but I think that it is an ideal rubber for people who are cut and sticky.
The more you use it, the better it will be, so we recommend that you use it for at least six months.
It is plain, but I think this is a good rubber.Overall Speed Spin Control Hardness Little soft
Recomend racket LIBERTA WILLOW
-
-
This racket is not a pen holder nor a veneer, but it is made by Darker
is. And it ’s amazing.When a special material is cut, it absorbs the opponent's ball like a sponge,
It feels like a board when attacking. "That's good, I'm good to defend"
Realized in a high dimension.Especially with a slightly thicker blade, it gives you a sense of security when cutting.
Because it stands out, if it is the first racket of the child, the fun of Cutman
I think it will double.
At first, stick around Takines chop, and with a little progress, a little aggressive
I think I should shift to a plus rubber.To be honest, I think that this option is enough for the racket.
As a point to be worried about, the two I bought were 91g and 97g. Somewhat heavy,
In the case of the reverse side, please be careful about troubles such as elbows.Also, it is possible that the delivery time is long and not in the store. Because it is Darker ...
Overall Speed Spin Control Touch Hardness Little soft
Recommend rubber(Front) Tackifire Drive
Recommend rubber(Back) Feint Long II
-
-
I use soft fronts on both sides, and I think the hardness of the upper plate is very suitable for the soft fronts.
It is very similar to the clipper wood that I usually use, but Avalox is a little harder, the ball releases faster, and the momentum is a little less.
Clipper is more exhilarating in one-course practice, but I think Avalox has fewer mistakes in competition.
I heard that the grip is thick, but the ST is almost the same as the clipper, so I was just right. It may be a little thick for women.
To be honest, I thought there was no racket that fits better than a clipper made of wood, but there was.
Overall Speed Spin Control Touch Hardness Little hard
Recommend rubber(Front) VO>102
Recommend rubber(Back) HAMMOND FA
-
-
Recommended for those who can make a certain amount of impact by hitting the ball with a fast attack in the front of the foreground.
This rubber is not recommended for people who have just transitioned from the back software, as they will not be able to learn how to hit the front soft.If you are using attack table software and find yourself making a lot of mistakes, try applying a thin layer of this rubber to a hard top racket.
I think you'll be surprised at how easy it is to use.It is a very soft sponge, so when you hit it diagonally to the trajectory of the ball, such as when hitting it lightly on a table or driving, the sponge properties come forward, causing rotation and stability.
Even with a light hit, the ball will be stabilized with a very slight drive, but if you apply a strong impact and the impact reaches the board, the character will suddenly change and the knuckleball will come out with a pleasant ``clacking'' sound.
Anyway, I'm really grateful for the fact that it's "easy to get into."
I think people who value control will be able to fight with this. For those who value pitch power and change, once you get back on track with this, go back to the offensive table. (lol)Overall Speed Spin Control Hardness Soft
Recomend racket HOUO 5ply plywood
Racket
Producer
Grip
Review Ranking
Rubber
Producer
Type
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.