Fastarc G-1
| Everyone's rating |
[Hardness] Little hard [Performance] Spin and Speed to have excellent |
(Click to zoom the photo)
Averages reviews points
- Speed:8.06
- Spin:8.85
- Control:8
-
Most players are looking for that rubber that fits them just right. Nittaku has introduced the Fastarc series with a variety to choose from. The Fastarc G-1 has the most power of the series. It's a very direct and to the point rubber. All offensive strokes from fast drives at the table to long distance counterlooping are executed with high precision. The hardest and fastest of all the Fastarcs.
- Pimples in
Specifications
- Producer
- Nittaku
- Product code
- NR-8702
- Speed
- 98
- Spin
- 93
- Control
- 51
- Hardness
- Middle hard
Players use Fastarc G-1
Reviews by user
-
-
Soil digging man （Experience：１１〜２０ years） It was a harder rubber than I expected. Verified Purchase
-
2021/04/29
I used a special thickness on the back surface.
It will be a comparison with V11.
Bench technology V11> G1
Counter V11 = G1
Block V11 = G1
The weight is about the same, and the flight distance is longer for G1.
There is not much difference in the amount of rotation of the upper rotation drive. The G1 has enough grip to give the impression that it will grab and fly once, so I think you will have different tastes. If you have a strong impact, I think V11 is more suitable.
The amount of rotation of the downward rotation drive is superior to G1, but there are variations in mistakes compared to V11. The sense of stability does not change much.All Speed Spin Control Hardness Little hard
Racket recommended use Kenta Matsudaira ALC
-
-
-
Turtle Bottom rotation is ◯ Verified Purchase
-
2019/09/11
Comparison with V15 extra.
Compared with V15, the lower rotation is lifted easily and the rotation is also fast.
However, it was easy to get out of the ball, and the feeling of the V15 scolding was lost.Also, since it is easy to draw an arc line, it is stable, but it takes time to get used to Tsuttsuki and receive.
All Speed Spin Control Hardness Little soft
Racket recommended use INNERFORCE LAYER ZLF
-
-
-
I wonder （Experience：４〜５ years） Verified Purchase
-
2018/06/25
It is in use in the back.
The drive enters very stably.
I think that it is easier to handle on board.All Speed Spin Control Hardness Little hard
Racket recommended use LATIKA 7
-
-
-
Bisukaria Morizono there only players use!
-
2016/02/08
This file is that of the Stark G-1 is using also Ishikawa players and Morizono player, Ito players, but I felt that there is only the performance of it. I think that it is back-facing than the fore. When used fore power, it has concerns about the control was hard to use the rest there was a very sense of stability that's back! Smash is questioned ability because they are influenced by the swing speed, but the drive will remain a little slip feeling when rubbed, but will enter once. And to bite us firmly out to the speed spin both. Also, it is the front-end processing, but also enters rub also against. Chiquita I was good easy to put the minute change! Block was also very easy to good rubber have an image that will fit on a table! I think the best you were Nittaku Lover! The advantage of this rubber is I think it can be realized both in the technology of the offense and defense at a high level. Racket is more of bouncing guy is good. Because it was easy to also block is in bouncing racket is the rubber that Sugggoku recommended for back surface!
All Speed Spin Control
Racket recommended use Amurutato
-
-
-
Salmon Roe King （Experience：６〜１０ years） This rubber is a double-edged sword.
-
2026/03/30
I'm not a big fan of tension rubbers, but this one had that typical tension rubber feel, in a bad way. It's a rubber where the feeling of hitting the ball with just the sheet and sponge isn't transmitted to your hand.
Also, I'll summarize who I think this rubber is suitable for and who it's not suitable for (I don't want you to miss out).
○ Suitable for (Extra Thick or Max recommended):
・Forward weight distribution, weighted on the ball of the foot
・Hits with a forward-hand stroke
・Prefers heavier rackets
・Likes rackets that provide power
・Likes the feeling of power from the tension rubber's sheet
・Prefers a thinner grip or ST grip○ Not suitable for (Thick or sticky rubber recommended):
・Backward weight distribution, weighted on the heel
・Hits by pushing with the side of the body
・Prefers rackets with moderate weight and a grip-heavy weight distribution
・Prefers rackets that don't provide power and have a solid feelPrefers thick rubbers like sticky rubbers that require a strong contact.
・The only grip option is FL.
All Speed Spin Control Hardness Little hard
Racket recommended use FLYATT Carbon PRO
-
-
-
Image Studio （Experience：４〜５ years） Overwhelming stability
-
2026/03/30
I used to use it thickly on my backhand during junior high school.
Above all, the G1 offered great stability.
Backhand drives and cuts were stable, but basic table techniques and blocks were especially stable.
I think it's a perfect rubber for rally-type players or players who want stability on their backhand.
However, it seems prone to tipping, so it might not be suitable for people with poor footwork or bad posture, but I think it's still worth trying.All Speed Spin Control Hardness Little soft
Racket recommended use TIMO BOLL CAF
-
-
-
Innerforce Layer ALC （Experience：Less than a year） The rotation is amazing!
-
2026/03/22
The spin was really noticeable.
In particular, hitting with backspin was easy, and loop drives were very effective.
The topsheet is strong and lasts for at least 4 months, but the sponge gradually loses its power after about 3 months.
By the way, I used the extra-thick version.All Speed Spin Control Hardness Hard
Racket recommended use Innerforce ALC
-
Rubber
Producer
Type
Racket
Producer
Grip
Review Ranking
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.