Innershield Layer ZLF
| Everyone's rating |
[Hardness] Little soft [Performance] Control and Spin are excellent. |
Averages reviews points
- Speed:5.78
- Spin:8.11
- Control:8.78
-
Constructed using Inner fiber technology.
Innershield Layer offers soft impact and is equipped with 2 ZL fiber layers.
Brings sharpness and sense of stability when cutting the ball.
- FL
- ST
- Cut
Specifications
- Producer
- Butterfly
- Product code
- 36691
- Speed
- 5.5
- Size
- 166 × 155mm
- Weight
- 85g
- Material
- Five plywood (Wood, ZL carbon, 7 ply wood)
- Thickness
- 5.1mm
Players use Innershield Layer ZLF
User reviews
-
-
Kazen (Experience:11〜20 years) There is a little wrinkle and it is very soft
-
2019/10/27
The cut is supple and the drive is fairly good. It is quite soft and easy to cut, but I felt wrinkles when driving and smashing. But if you get used to it is a pretty good racket.
Overall Speed Spin Control Touch Hardness Soft
Recommended rubber (Forehand) Q5
Recommended rubber (Backhand) VIPER SOFT
-
-
-
square A habit that makes sense why so few people use it
-
2025/11/19
It has so little bounce that it reminds me of a Cutlass.
Because it doesn't bounce, if you control a powerful hit, it will naturally land in the court, but it flies out at an angle. It doesn't have enough power to send the ball flying forward, so low cuts are difficult.
With a cut racket that's more attack-oriented and has a little more bounce, the ball flies out straight, making it easy to control low.
This is what's difficult about cut rackets; the less bounce there is, the easier it is to control a powerful hit.
I think it's more suited to coaching than playing in the field.
If you just want to pick up the ball and have your practice partner hit lots of cut shots, this is the one for you.Both inverted and high-grip rackets cut well with push shots, and it's easy to handle. However, the change you expect from a high-grip racket is modest.
It's more about stability than scoring power. Scoring power is left up to the player's ingenuity with this racket.
Overall Speed Spin Control Touch Hardness Soft
Recommended rubber (Forehand) Tenergy 64
Recommended rubber (Backhand) VERTICAL 20
-
-
-
Equipment Commentary Chair (Experience:2〜3 years)
-
2025/02/16
I use this racket as a cut player. It has good control and balance for cuts and doesn't bounce, so it's easy to block.
The soft feel of the ball makes it easy to control even with hard rubber.
The thin board is flexible, so it's easy to push.
When hitting a drive, it has a bit of a quirk, so you need to be careful.Overall Speed Spin Control Touch Hardness Little soft
Recommended rubber (Forehand) DNA Dragon power 55
Recommended rubber (Backhand) VERTICAL 20
-
-
-
Kokeko (Experience:4〜5 years) I'll come back here after all
-
2023/09/17
I'm a cutman.
I have been using various rackets and rubbers.
I keep coming back here.
The grip uses FL.
The feeling that makes you want to hold it forever is addictive.
Although it is a little thin, it is stable and does not feel slippery.
The drive has a soft feel, but it doesn't give you speed.
It will be a light ball.
Needless to say, it has excellent stability when it comes to punching and cutting.
I'm not a player, so I recommend this racket, which is fun and stress-free.Overall Speed Spin Control Touch Hardness Soft
Recommended rubber (Forehand) Tackiness Chop II
Recommended rubber (Backhand) Tackiness Chop
-
-
-
Pig face butazura (Experience:6〜10 years) Best
-
2021/08/29
Extremely easy to use
First of all, the round grip makes it easy to grip.
The shot feeling is very soft, so it is easy to stabilize.
The drive is a little slow and stretches, so it's hard to take
I'm using back grains, but with just the right way to fly
It fits on the table.
It's really easy to use, so it's recommendedOverall Speed Spin Control Touch Hardness Little soft
Recommended rubber (Forehand) TENERGY 05
Recommended rubber (Backhand) Feint Long III
-
-
-
Codename X Lin (Experience:4〜5 years) Too much
-
2019/04/09
Cut out serve is easy! It is a service ace mass production with the lower rotation serve lol
I think that it is recommended to drive from the middle team easy to attack type cutmanOverall Speed Spin Control Touch Hardness Little soft
Recommended rubber (Forehand) HURRICANE PRO Ⅲ TURBO ORANGE
-
-
-
Mine (Experience:6〜10 years) For attack-oriented cutman
-
2019/03/06
As described by other users, it does not play much with cut rubber, so you need some degree of swing and power. However, if you put up a tension type rubber such as Tenazi 05 · 64 or Victus, it will be much better.
Because it does not overdo too much, it is clear to attack at the essential point, the feeling of grip at cut and Tsutski is very good, and if you put on the tension type rubber you wrote earlier, if you stretch the tension type rubber you wrote, The ball will fly.
Cut in Nakaze 6 - 70% It is highly recommended for players of about 3 to 40% attack.Overall Speed Spin Control Touch Hardness Little soft
Recommended rubber (Forehand) V>15 Limber
Recommended rubber (Backhand) Feint Long II
-
Related racket
Racket
Producer
Grip
Review Ranking
Rubber
Producer
Type
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.
