's profile
| Gender | Male |
|---|---|
| Age | U40 |
| Experience | １１〜２０ years |
-
Use racket, rubber
-
- Racket
- In most thin blade in China pen, that is newly designed for use wood and plywood structure, was a...
-
- Rubber (Front)
- This version confers the highest dynamic and thus makes MX-P the fastest rubber of the EVOLUTION ...
-
- Rubber (Back)
- Most players are looking for that rubber that fits them just right. Nittaku has introduced the Fa...
-
User review
-
-
-
2018/09/11
As stated in the phrase "sticking revolution", it is quite distinctive rubber in adhesive tension.
The arc of the drive is abnormally high, it rises to a great extent and it will fit in the end line, so if you grasp the properties of the archwire you will get a sense of stability. However, depending on the racket, this arc can become uncontrollable.Advantages of the adhesive sheet are as follows.
· Serve, the tsutsuki runs out
· The stop on the platform stopsThe drawback is as follows.
· Blocks are easy to over
· Speed is not that much.
· Drive is light so it is easy to block or counterAlthough there is a rotation amount why the drive receives the impression of the power shortage somehow. I also used it in the back, but I gave up because the arc line was so high that it was hard to do blocking.
The racket is compatible with ALC or 7 sheets for now.
I will recommend it to the rally-oriented intermediate player's foray who tried to stick but I use tension because I give up.Overall Speed Spin Control Hardness Little hard
Recomend racket Forutiusu FT
-
-
-
-
2018/10/16
I felt the whole impression closer to MX-P. Hardness also has a stiffer shot feel like MX - P, it has a good spherical holding and strong rotation is applied. However, since MX-P is larger in momentum, it can be said that MX-P is a rubber specialized for the front team. Especially if the counter is easy to do, if you fight in front of Nakazaki, then EL - S will be more advantageous than MX - P.
In order to make up for the momentum we recommend using a racket with special materials or 7 for plywood and for use in the fore.Overall Speed Spin Control Hardness Little hard
Recomend racket Innerforce Layer · ZLC-CS
-
-
-
-
2018/10/02
For the table software it will take a turn, if it is this rubber it will be able to score with a lower rotation serve. However, strong rotation is impossible, so strong loop drive can not be issued.
Because it is hard to be affected by the opponent's rotation which is the feature of table software, it is handy in the receive. From the goodness of control, it is a table soft rubber entering into choices in both the fore and back.Overall Speed Spin Control Hardness Little hard
Recomend racket Swat Carbon
-
-
-
2018/09/26
I tried to purchase this carbonated racket, looking for momentum from the WFS rotor. There is a certain momentum, but I was not accustomed to the shot feeling of the carbon and was not used continuously.
Overall Speed Spin Control Touch Hardness Little hard
Recommend rubber（Front） Evolution EL-P
Recommend rubber（Back） JOOLA RHYZM TECH
-
-
-
2018/09/19
Compared to tenazi 05, the amount of rotation is slightly inferior, but the speed and control is higher for 80.
I used 05 for the fore and 80 for the back, but it is very hard to keep up with the tool for the technology.
I got a drive of a powerful trajectory by automation, I had my dream come true with this rubber, but I wanted to find a rubber that suits my ability. Because the table tennis is too early for intermediate people, I am on a journey to find alternative options besides tenazi.Overall Speed Spin Control Hardness Little soft
Recomend racket Innerforce LAYER ZLF - CS
-
Racket
Producer
Grip
Review Ranking
Rubber
Producer
Type
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.