ゲンガー's profile
| Gender | Male |
|---|---|
| Age | U30 |
| Experience | ６〜１０ years |
-
Use racket, rubber
-
- Racket
- Developed with and used by Tomokazu HarimotoSimilar to Innerforce Layer ALC with moderate speed a...
-
- Rubber (Front)
- • Tenergy 80 is the ideal balance between spin and speed• Even faster than Tenergy 05 and offerin...
-
- Rubber (Back)
-
User review
-
-
-
2025/10/26
Mine weighed 90.7g.
It has a nice wood feel and doesn't resonate too much in the hand.
The grip is a bit rough and feels somewhat cheap.
Being all-wood, it's very easy to hit loop drives with. Among all-wood blades, I was able to get quite fast shots on strong hits
It reminded me a lot of the Clipper Wood.Overall Speed Spin Control Touch Hardness Little hard
Recommend rubber(Front) V>20 Double Extra
Recommend rubber(Back) HEXER POWERGRIP SFX
-
-
-
-
2025/08/17
Mine weighed 85.3g.
Overall it didn't feel like it flew much.
On light hits it felt soft, and on hard hits I could feel the fast ball release, but it didn't feel like it had that much speed.
Topspin drives from mid-distance would fly off before I could fully get the spin on them, coming out as straight, spinless shots.
So I felt it would be tough for players used to inner blades who like to add spin and drive the ball.
That said, using it close to the table gave a very good impression — I think it's good if you're conscious of hitting backspin balls before the peak and swinging compactly on topspin.
Overall I felt it's good for someone starting out with outer blades, but it didn't suit my playing style.Overall Speed Spin Control Touch Hardness Little hard
Recommend rubber(Front) TENERGY 05
Recommend rubber(Back) Tenergy 05 FX
-
-
-
-
2025/02/04
I put the 2.1mm on a Harimoto Super ALC, coming to 48.3g.
I used it on my backhand.
Every technique is easy to do, and since the sponge hardness is 42.5 degrees, it doesn't fly too much, which makes it stable.
The topsheet is also strong, so it's easy to drive against backspin too.
Compared to higher-end rubbers like MK FX or Tenergy 05 FX, the spin is a bit weaker, but if attacking isn't your main focus on the backhand, I felt this was more than enough.
Personally, what I liked was that the topsheet is a bit insensitive, which makes handling loop drives more consistent.Overall Speed Spin Control Hardness Little soft
Recomend racket Tomokazu Harimoto Innerforce SUPER ALC
-
-
-
-
2024/04/18
My unit weighed 89.2g.
It's a 5-ply wood blade, but the ball leaves it faster than I expected, giving a springier impression.
That said, the power is still very much what you'd expect from a 5-ply.
I think this suits someone who's using special-material blades and wants a bit more of that wood feel, rather than someone looking for a purely classic 5-ply.
The grip felt more thin than narrow — the flare section is deep, making the blade feel far from where you hold it.
I felt this is a grip that splits opinion, so if you're curious, I'd recommend holding one in person at least once.Overall Speed Spin Control Touch Hardness Little soft
Recommend rubber(Front) V>20 Double Extra
Recommend rubber(Back) Tenergy 64
-
-
-
-
2024/04/18
My blade weighed 87.6g bare, and 188.2g with rubber on.
I'll compare it to the Harimoto Inner ALC.
The grip is thinner than the Harimoto Inner ALC and feels slimmer in the hand.
The feel is slightly harder than the Harimoto Inner ALC, and the trajectory felt a bit flatter.
Also, since it's an inner blade, you can feel the ball hold and it generates spin, but compared to other inner blades it feels more on the outer side.Overall Speed Spin Control Touch Hardness Little hard
Recommend rubber(Front) NEO HURRICANE 3
Recommend rubber(Back) JEKYLL＆HYDE V47.5
-
Racket
Producer
Grip
Review Ranking
Rubber
Producer
Type
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.