BLUESTORM Z1 TURBO
| Everyone's rating |
[Hardness] Little hard [Performance] Speed and Spin to have excellent |
(Click to zoom the photo)
Averages reviews points
- Speed:9.54
- Spin:8.75
- Control:8.21
- DONIC BLUESTORM - A storm brews ! BLUE
-
A comprehensively thinner top surface rubber, subjected to high tension, allows space for a thicker sponge - generating extra power and speed.
The DONIC Bluestorm Series offers noticeably greater acceleration whilst retaining its outstanding spin and speed characteristics, making the latest trend.
The thinnest sponge is 1.9 mm, middle sponge thickness is 2.1 mm - and the thickest variation is called max+, because this sponge is even thicker than previous max versions.
Bluestorm is available in five versions. Select your own Bluestorm!DONIC Bluestorm Z1 Turbo: Power personified.
A middle-pored sponge with a short wide pimpled structure. The Turbo has a 50° sponge and is therefore slightly harder than the standard Z1.
DONIC has produced a more dynamic version of Z1 with Bluestorm Z1 Turbo. The sponge of Z1 Turbo is slightly harder but with the same middle pore size. An almost perfect combination with the very thin high-tension pimpled rubber and the highly valued dynamic blue sponge. The perfect weapon for uncompromising attackers.
- Pimples in
Players use BLUESTORM Z1 TURBO
Reviews by user
-
-
Equipment straying （Experience：１１〜２０ years）
-
2020/11/09
Used in the back.
The hardness is 50 degrees, but I don't feel the hardness very much. It is a rubber that is easy to use at a high level with good meat and good drive.
It doesn't die if left alone like Tenergy, and it has a long life as long as you stick a sheet on it.The only thing I find difficult when shaken. The sheet is soft and I feel weak if I can't shake it. If you use Rosena, Tenergy, or Dignix, it may fall off when you hit it thinly.
Looking at the cost performance, it is quite excellent. High tenergy, non-tenergy people are recommended to try it once.
All Speed Spin Control Hardness Little hard
Racket recommended use Mizutani Jun
-
-
-
Usho （Experience：６〜１０ years）
-
2020/09/17
It's not as good as Tenergy 05, but its rotation and grip are awesome! Speed was too different
All Speed Spin Control Hardness Hard
Racket recommended use Zhang Jike ALC
-
-
-
Seibu Ryuki （Experience：６〜１０ years）
-
2020/08/26
I used to use Blue Fire JP01 turbo all the time, but now I am sticking this rubber's extra thickness on the fore. Power and rotation are extremely suitable for drivemen
All Speed Spin Control Hardness Hard
Racket recommended use Timo Boll ALC
-
-
-
Table tennis （Experience：２〜３ years） Rubber that fits people
-
2020/06/30
The sheet is thin rubber. It was lasanter. It was easy to do by myself except for the drive for the lower rotation.
The drive for lower rotation is the impression that it does not rise.
It may be that effect because it is a straight rubber overall.
For the upper rotation, he sharply entered the opponent's court!
The problem was rotation. It doesn't cost much. It may be my skill shortage, but it was not as high as other rubbers.
Thank you for reading to the end.All Speed Spin Control Hardness Hard
Racket recommended use INNERFORCE LAYER ZLF
-
-
-
Jumping Calvi （Experience：１１〜２０ years） It's really good.
-
2020/06/22
I used MAX for the inner force ZLC fore.
First of all, it was definitely higher performance than this price range.
It was good point
・Serve and drive will take a lot of rotation and a heavy ball will come out.
・Side-turn rotary serve bends well.
・Because it bounces considerably, speed can be increased. The number of times of taking no touch with the drive has increased considerably.
-Easy to rotate rally.Bad point
-The drive arc is low.
-When hitting a Tsutsuki, etc. of a weak opponent with an impact drive, it is easy to hit the net without going up.
-While it is easy to apply strong rotation, it is easily affected by rotation. Obviously.
As mentioned above, there is no doubt that it has more performance than the price, so if you are interested please try using it.
However, since it is a rubber of 50 degrees, if you are not confident in the impact, you may try using it from Z1.All Speed Spin Control Hardness Hard
Racket recommended use Innerforce Layer ZLC
-
-
-
Tsukikage Ao （Experience：１１〜２０ years） A masterpiece that meets the needs of users in all respects
-
2020/05/31
I've been interested in it for a long time, and I bought it at the same time I bought the racket this time.
The German standard was 52 degrees and the impression before use was that it was a hard German rubber, but when I actually arrived and tried using it, I was betrayed in a good sense. First, I don't feel the hardness of 52 degrees. The ball feels softer than the stated hardness even though it flies like it growls before it bounces, probably because the topsheet is designed to be thin.
Serves and drives can also be cut. It will rotate properly, so you can swing with confidence. And above all, this price. Depending on the shop you buy, the average price is 4500 yen to early 5000 yen, which is friendly to students. DONIC is not so famous in Japan, but if you put this rubber into the volume zones of manufacturers such as Rakuza, Spaven, Rosena, and G-1, it could be a great war, right? It makes me think that way. For the time being, it is a god rubber.
If you don't have money but are looking for a high-performance and versatile rubber like Tenergy, this is a must-see! !All Speed Spin Control Hardness Hard
Racket recommended use LIBERTA SYNERGY PLUS
-
-
-
MR-01 （Experience：More than ２０ years） I think it's Cospa No.1 rubber
-
2020/05/23
I've been using the Bluestorm Z1-3, and each has a little "a feeling of lack." However, using this rubber, everything was solved.
The Z3 was easy to drive, but it was a little lacking in power, and sometimes I jumped too far from the image in small areas such as Tsutsuki. The Z1 is powerful and easy to use on the bench, but the arch wire is low.
However, when I put a turbo on one side, the feeling arc became higher and it became easier to back drive (chiquita) especially on the table. The man-like drive stretches comfortably, and it's easy to control Tsutsuki and stop, so I decided to use a double-sided turbo immediately.
The biggest attraction is the performance that surpasses the price. I think it's a rubber that makes a perfect match with Raguza.All Speed Spin Control Hardness Little hard
Racket recommended use LIBERTA SYNERGY PLUS
-
Related rubber
Rubber
Producer
Type
Racket
Producer
Grip
Review Ranking
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.
