roar's profile
| Gender | Male |
|---|---|
| Age | U10 |
| Experience | ２〜３ years |
-
Use racket, rubber
-
- Racket
- Balanced racket for a cut of the balance of momentum and control. Recommended to cut introductory...
-
- Rubber (Front)
-
- Rubber (Back)
- Grain shape close to a grain high.Change system table rubber to exhibit also high knuckle effect ...
-
User review
-
-
-
2023/05/08
Although it is an anti-rubber, there is some friction in the anti and the sponge is soft, so if you do your best, you can also spin yourself.
This is a review from a cutman's point of view, but Tsutsuki was difficult at first, but it was fairly easy to do once I got used to it. The cut is still anti-rubber, so even loops with a large amount of rotation can be cut without being affected much. However, against speed balls, I was pushed a little and it was difficult. If you have the technology to suppress the speed ball, I think that it can be used for cutting!Overall Speed Spin Control Hardness Soft
Recomend racket MASAMUNE
-
-
-
-
2023/04/29
I think that this rubber should be used on the back side!
First of all, it is soft, so you can stably block and stand without jumping too much. If you hit the drive with the consciousness of biting into the sponge, it will rotate very much and be stable. The counter is a little difficult, but I think it's easier to enter if you hit it with the image of hitting from above.
The recommendation is still the fore G-1 special thickness and the back C-1 thickness! I think this combination will fit in the coat once. If you are a beginner, please try to use it on the fore side, and if you are an intermediate or above, please try to adopt it on the back side!Overall Speed Spin Control Hardness Little soft
Recomend racket Swat Carbon
-
-
-
-
2023/05/08
This is a review from a cutman's point of view!
The change is not as good as P1, but it was easy to use because it was easy to knock down the grain as desired. Tsuttsuki cut when I was conscious of applying it thickly. The cut has a low maximum amount of rotation, but it can be rotated stably. Well, to put it badly, there is not much change in the cut.
However, the front-end heterogeneous technology such as push and cut block has changed in a good way like P1.
It is recommended for players who are different from the front team than Cutman!Overall Speed Spin Control Hardness Little soft
Recomend racket Super defensive
-
-
-
-
2023/04/29
I borrowed a friend's and tried it out!
Personally, meat-based techniques were easier to do than rotation-based techniques! Of course, it's tenergy, so it's easy to do rotation technology, but I feel like it's inferior to 05. Of course, there is no doubt that it is an easy class to do compared to other rubbers.
After that, the block was very easy to do. Like 05, it becomes an arc and stabilizes.
I thought it would be safe to adopt it in the back rather than the fore. If you use this rubber for the back of the main battle, you can put it in safely, so I think it's really good!
I think 05 is better suited for cutting.
If you use a lot of meat-based technology, please try to adopt it!Overall Speed Spin Control Hardness Little soft
Recomend racket Timo Boll W5
-
-
-
-
2023/05/09
I personally thought this rubber was a speed system. The feeling of speed drive, meat hitting, etc. was very good. However, it may be better not to expect too much rotation.
Since the sheet is a hard rubber that flies considerably, I think that a soft racket such as five plywood or an inner layer is good if it contains a special material.Overall Speed Spin Control Hardness Hard
Recomend racket VIOLIN
-
Racket
Producer
Grip
Review Ranking
Rubber
Producer
Type
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.
