Katsuo000's profile
Gender | Male |
---|---|
Age | U30 |
Experience | More than 20 years |
User review
-
-
We won the TSP Rubber free trial campaign of the table tennis election and used it. When I was a junior high school student, I used the spectrum on the B side, at that time I used a glue. I felt that the impression I used without glue for a while for this time turned to be a plastic ball and the power of the knuckle fell. When becoming a plastic ball and playing with the opponent's table it will be upwardly rotated by friction with the base.
However, I think that the brand called spectrum is healthy and put together in one word, I think that it is a good rubber that balances well the high-speed pitch, the knuckle, the insensitivity to rotation by the ball separation of the royal road of the table rubber. It is perfect for the style of discarding Tsutsuki and using it on the B side, such as angle striking, meat striking, pushing, etc., and driving on the F side.
Although it is not subject to rotation as it is under tension, I think that looking for rotation on the front rubber is nonsense. I felt that the ball slightly fell on the plastic ball, but I thought that this would be supplemented by accustoming. I would like you to use it on Driver Man's B side.Overall Speed Spin Control Hardness Little hard
Recomend racket Forutiusu FT
-
-
The foreground is a misconfigured NEO 3 Bruspo.
Even the same swing will take a stronger rotation than Mizutani Haya ZLC!
It feels like a Timo Boll racquet-like rigid, hard upper plate, but supple rigidly ZL carbon and a sheet thickness of 5.5 mm × grip center of gravity feel more flexible than I thought it was more manageable than I thought .
Especially the platform technology such as stop and Tsutski stopped and stopped than Mizutani Haya ZLC and the control was good.
The problem is that there is not much sense to grip the ball, so the sense of the drive is a bit difficult.
I managed to deal with the forest, but the problem was backhand drive.
Obviously I felt it was necessary to hit backdrive with a sense different from the wooden racket.
Backhand is an important technology in modern table tennis, so I felt again that it is important to give up if it is difficult and if you feel that you can not Fit by any means.
As a result of stretching yourself a little new feeling has come to me, so I'm thinking of continuing use.
Although it is not easy shopping, it is still the highest racket, so please try it once!Overall Speed Spin Control Touch Hardness Hard
Recommend rubber(Front) NEO HURRICANE 3
Recommend rubber(Back) TENERGY 05 HARD
-
-
As the title suggests, it was a very easy to use combination.
・ Receive is very easy. Tsutsuki cuts. Easy to overwrite. Makes mistakes even if they float! Chiquita will enter and the drive will definitely stop. The flexibility to hit Chiquita and backhand drive from receive!
・ Easy stop can be set even at the horizontal rotation rotation serve!
・ Because it does not bounce, it is easy to put out a broken serve. Short and cut serve is also easy to mess up!
・ Because it does not bounce, it can control not only the course but also the depth (or shallowness) of the ball.
・ We can compete by speed of ball!
・ Because the ball enters shallowly, you can aim for a wide-angle course that cuts the side!
× After all, the speed is slow and the ball enters fairly shallow. Absolute power is low!
× Powerful ball may be hit. If you are struck, you won't get it or you may not be touched
X The quality of the ball was reduced.
× Because there is no power, you have to inevitably compete with the speed of the ball.
That's it. Personally it was a very good impression!
By all meansOverall Speed Spin Control Hardness Little soft
Recomend racket INNERFORCE LAYER ZLF
-
-
It was borrowed because members of the club were using it.
Anyway it is very easy to control! !
I understand why the owner challenges from the receive, such as Chiquita in an offensive posture.
I have a pretty stable impression when I was able to apply my own rotation.
It is difficult to put a little power, but I felt that there is no choice but to compensate for with muscle training.
There is also a board thickness, if you combine a hard rubber, you can put out the power that can be misplaced.
While refining basic technology with this racket, I think that it is good to go to the special plywood and 7 plywood to win.
I definitely recommend it to beginners.
To my daughter, I think that this is the first racket of five plywood.Overall Speed Spin Control Touch Hardness Soft
Recommend rubber(Front) V>15 Limber
Recommend rubber(Back) Fastarc G-1
-
-
I tried hitting it with a hard tension rubber.
I think that it is an inner ALC, but I think that it uses a harder wood with a faster upper sphere than expected.
Fore Dignics05 was too soft and I found it difficult to hold it down with a counter drive or block.
On the other hand, the back Tenergy05Hard was too hard and too far away from the ball, and the backhand drive against the lower rotation was caught on the net.
I feel that the fore is a leopard rubber, and the back has Tenergy05 or a soft adhesive tension.
Personally, the feel at impact is soft compared to ZLC ZLC, but I felt the ball was released earlier.
I felt that the racket itself was similar to the Timo Boll Spirit.
Compared to Timo Boll Spirit, it has a softer feel at impact, it is easier to handle, and I think it is a powerful racket close to Timo Boll Spirit (Outer ALC).
The ball separation is fast, but I think the outer speed is faster for the outer ALC.
I think that 2nd speed or both speed and rotation is better than outer ALC.Overall Speed Spin Control Touch Hardness Little hard
Recommend rubber(Front) OMEGA VII China Ying
Recommend rubber(Back) DIGNICS 05
Racket
Producer
Grip
Review Ranking
Rubber
Producer
Type
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.