NEO HURRICANE 3
| Everyone's rating |
[Hardness] Little hard [Performance] Spin and Control to have excellent |
(Click to zoom the photo)
Averages reviews points
- Speed:7.29
- Spin:9.53
- Control:7.87
-
Powerful “NEO” sponge and Hurricane 3 rubber with special glutinosity could create stable and high-speed arc, improve the scoring ability of players. NEO Hurricane 3 has a high speed and low fast loop, changeful arc, stronger spin.
- Pimples in
Players use NEO HURRICANE 3
Reviews by user
-
-
Kuromame （Experience：４〜５ years） Cutman tried it! I'll review it rigorously, but it's not bad!
-
2022/01/29
Uses Soki's 41 degrees (Japanese standard 50 degrees) and compares it with Nittaku's 42.5 degrees (Japanese standard)
Adhesive strength / Soki is stronger
There is a catch than drive / Nittaku, the amount of rotation is higher for Soki, but the ease of applying is higher for Nittaku (because Nittaku is soft and easy to handle because the sponge is made in Japan)
The speed was also faster and deeper in Souki.
Backhand / Soki was more caught than Nittaku, so there were many over mistakes.
Back is Nittaku's choice
It's an individual impression, but I personally think that it's a better rubber than Nittaku because I like the back to be a hard rubber and the one with a strong catch (although it's only one back grain height).
Bench / This was not much different, but the impression that Souki is harder and easier to play (Souki can choose 38 to 41 degrees, 37 degrees is treated as special hardness)
Cut / Nittaku is less likely to get caught than Soki, so Nittaku was more stable.
Soki is easy to cut because it is often caught, but it lacks a sense of stability.
For those who want to use it for stability and back, Cutman Nittaku
For those who want to play with the opponent with all kinds of techniques such as overwhelming amount of rotation, speed, and tabletop, Souki
It was a review of Cutman using an attack racketAll Speed Spin Control Hardness Little hard
Racket recommended use Acoustic Carbon
-
-
-
NIKAIDOU （Experience：６〜１０ years） There is also back adhesive
-
2022/01/28
I tried the Nittaku version of NEO3 in the back.
The sponge is softer and easier to use than ordinary adhesives, but the sheet is hard and requires some impact.If it is a back, it is easy to add power and change if you consciously hit the tip of the racket. Connecting in a difficult position tends to be a stick ball, so I felt that I needed an arm that could be devised such as changing the rotation.
It goes without saying that Tsuttsuki, loops, and blocks are weapons that lead to points.
I think it's good to always have the consciousness to put out a high quality ball because you can make changes by yourself because the depth, rotation and speed do not come out with auto.I liked it so much that I thought I would use it for a while. It's a good rubber.
All Speed Spin Control Hardness Little hard
Racket recommended use LIBERTA SOLID Pro
-
-
-
Yamamura （Experience：１１〜２０ years） Depends on how to guess
-
2022/01/27
I have used turbo orange, but I felt that the ball was coming off quickly, so I returned to neo3.
I feel that neo3 has the best balance between the seat and the sponge.
The speed is impacted, and I am conscious of making long and short changes in the loop.
It's easier to hit, rub, hit, and slow down than other sticky or sticky tensions.
If you hit it halfway in a scary scene, it will fall, so it is also an advantage personally that you can reopen with "let's make a solid impact on everything".Even if you are a tension user, you may try it if you have a lot of over mistakes in the game.
I think you need to be patient until you get used to how to guess.All Speed Spin Control Hardness Little hard
-
-
-
Do it with a pen table （Experience：Less than a year） the Chai Raba!
-
2022/01/01
First of all, the first thing I thought was that if the impact was weak, it wouldn't really fly.
Well, I recommend you to purchase considering the compatibility with the racket
↑ I think it's good to combine it with a racket that flies quite a bit ♪
I felt the stickiness was strong. Also, the drive that has a change in rotation peculiar to adhesive
When I asked the other party, I was told that it was difficult to take w
The loop takes a lot of rotation, and even the connecting loop can be scored, so it's refreshing!
Please use it by all means!All Speed Spin Control Hardness Little hard
Racket recommended use SPECIAL DYNAM 10.5 SQUARE TYPE
-
-
-
Kuromame （Experience：４〜５ years） Insanely soft and very bouncy
-
2021/12/29
Cutman using attack racket, used for F, B is Grass.d.tecs GS acid green
Transfer from Pro III Turbo Blue and Turbo Orange
It's so soft that you can't think of it as an adhesive rubber
I heard that it was sticky, but it felt like the stickiness was dropped and the momentum was raised.
The arc line was high and it fits firmly on the table.
Regarding the downward rotation, I felt that the turbo series was running the ball (because the sponge is hard and powerful).
Because the tabletop processing / sponge is soft, there were many over mistakes such as flicking, it is difficult to play etc.
Stops etc. did not change in particular
Backhand / soft, so you can use it in the back without any problems
NEO3 was overwhelmingly easier to do than the cut / turbo series
Despite the racket for attack, the suppression works well
Since the hitting sound of the knuckle cut and the cut cut is the same, it is easy to make changes and there were many mistakes of the opponent.
summary
・ Special materials are recommended for rackets (outerwear, ALC, acoustic carbon)
・ People who have no power and want to use adhesive
・ People who want to use adhesive even in the back
・ Ideal for Cutman
・ Middle and apse are recommended rather than the front (they will bounce enough even inquiries)All Speed Spin Control Hardness Little soft
Racket recommended use Acoustic Carbon
-
-
-
Kuromame （Experience：４〜５ years） The grains on the surface are lively! (Self-striking effect)
-
2021/12/25
B-side Grass.d.tecs GS Cutman using acid green, transfer from Pro III Turbo Blue
First impression
Anyway, it's light and soft (46 grams after cutting)
It feels soft to the touch, but when I hit it, it was really soft
I often hear rumors that it will speed up, but it felt like I had dropped the adhesive and gained momentum.
However, it cannot match the tension rubber
The amount of rotation is also perfect
Although it is a downward rotation, this is because the ball was running in turbo blue
As for the block, Turbo Blue was not overwhelmed by the opponent's ball.
Probably because the sponge is soft
I heard that it is easy to do because it does not fly on the table, but I personally felt that it would fly, so it was difficult to do
Probably turbo blue is easier to play because the sponge is harder
I tried shaking it in the back, but it was unexpected. I felt that the back was just right soft
cut
It is overwhelmingly easier to do than Turbo Blue, and despite the attack racket, the restraint hears
Inquiries will fly enough
summary
I felt it was better to use it in the back than to use it in the foreground
For cutmen, people with weak impact who want to use adhesive, back adhesiveAll Speed Spin Control Hardness Little hard
Racket recommended use Acoustic Carbon
-
-
-
shinkey12 （Experience：２〜３ years） Speed if you shake, slow return if you just hit
-
2021/09/11
Buy Bruspo
The amount of rotation is a surprising amount
After bouncing on the opponent's court, it will crash straight toward the floor (laugh)
It's easy to serve, so it's recommended for beginners, and everyone knows that it's the champion rubber used by many professional players.
Especially the tabletop is godly
Not recommended for the back sideAll Speed Spin Control Hardness Hard
Racket recommended use INNERFORCE LAYER ZLF
-
Related rubber
Rubber
Producer
Type
Racket
Producer
Grip
Review Ranking
-
Get the Amazon gift card at a Review!
20 points are added in the post. You can replace it by Amazon Gift Card worth $5.00 with 1000 points.
